600ml Household Ultrasonic Bath
Application:
Jewelry, diamond, wedding ring, necklace, earring, body jewelry,
body piercing, clock & watches, eyeglasses, contact lens, dentures,
table-ware, printer inkjet, seal and comb, toothbrush, baby feeder,
baby nipple, etc.and all your small things.
Specificatoin:
| Model | JP-3800S |
| Tank capacity | 600ml |
| Ultrasonic power | 35W |
| Timer | 5 interval times adjustable |
| Frequency | 40000Hz |
| N.W. | 1.2 KG |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz ; AC 220 ~ 240V, 50 / 60 Hz |
| Tank size | 155× 95×52mm |
| Unit size | 210*145*140mm |
| Inner packing | 265×174×180mm |
| Big Carton packing | 525*455*440 mm |
Product description:
600ml digital ultrasonic cleaner, ultrasonic jewelry cleaning
machine
JP-3800S with 5 intervals times adjustable
Having great effect of sterilizing and cleaning
Home used mini ultrasonic cleaner
Features
- It presents the capacity of 600ml.
- Ideal for cleaning spectacles, jewelry, dentures & Braces, cleaning
watches and many more to maintain hygiene.
- Presents a gentle cleaning method with a high cleaning frequency of
40KHz normally with a cleaning power of 35W.
- Presents a stainless steel tank to use the cleaning fluid to clean
the items at high frequency.
- It vibrates at a high frequency to remove the dirt from the
smallest and inaccessible particles.
- Has a fine quality mesh basket for safe cleaning
Images of this model:
How does Ultrasonic Cleaner work?
How to use an ultrasonic cleaner?
(take medical instruments as example)
In all cases manufacturers’ instructions should be followed when
using an ultrasonic cleaning process. These are representative
steps.
Fill the ultrasonic cleaning tank with an approved medical
instrument cleaning solution such as CLN-LR012 available from
Tovatech following dilution instructions provided. Turn the cleaner
on to start the degassing process. This step removes entrained air
in new solutions that interferes with the efficiency of cavitation
and takes approximately 10 minutes.
In the meantime:
- Segregate instruments by alloy or composition to avoid potential
damage (Chromium plated instruments should not be cleaned
ultrasonically)
- Instruments with movable parts should be disassembled to facilitate
cleaning
- Place the instruments the ultrasonic cleaner’s mesh basket, taking
care that they do not come in contact with each other
- Cannulated or lumened instruments should be positioned to insure
interiors are wetted with the cleaning solution. In some instances
placing them on an angle will facilitate this
- Set the control panel per manufacturers’ instructions and start the
cleaning process
At the end of the cycle, remove the instruments from the ultrasonic
cleaning bath and thoroughly rinse them to remove all traces of the
cleaning solution. Deionized water rinses will avoid spotting. If
the instruments are not to be immediately disinfected and
sterilized be certain that they are thoroughly dried and protected.
Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used
ultrasonic cleaning solutions. In some instances it is recommended
that solution be drained and tanks thoroughly cleaned and dried
after each ultrasonic cleaning cycle. Most solutions available
today are biodegradable, which facilitates disposal but local
authorities should be consulted on proper practices.
