Speical Design With Small Hole Basket Long Gun Ultrasonic Cleaner
1.Why Do You Need Ultrasonic Cleaner
Gun Lover Usually clean their gun once a week but mostly get
trouble in cleaning. There are many hard cleaning components in a
gun and it is not easy to clean by hand.
However, ultrasonic gun parts cleaner will do all cleaning job for
you and you just need to wait several minutes.
It clean every parts of your gun and it keep same intensity in
every direction.
2.Advantage Of Ultrasonic Gun Parts Cleaner.
- More thorough cleaning- cleans down to one micron cleanliness level
- Shorter cleaning times- 3-5 minutes for most firearms
- Less handling- allows the user to perform other functions while
cleaning is in process
- Lubrication tank design uses ultrasonic energy allowing complete
coverage in every crack and crevasse
- Cleaning detergent is specifically chosen for firearm cleaning and
includes a rust prohibitor
- Lubrication is specially formulated for firearm cleaning with water
displacement and low temperature properties
3.How Gun Parts Ultrasonic Cleaner Work?
Ultrasonic transducers mounted to the tank bottom produce high
frequency sound waves which cause rapidly alternating high & low
pressure conditions in the cleaning solution. Millions of
microscopic bubbles form and then implode (a process called
cavitation) resulting in an intense scrubbing action that removes
fouling even in the smallest indentations, grooves and impossible
to reach by hand areas.
Using water based detergents with rust inhibitor and heat, unburned
powder, carbon, lint, oil & dirt will be quickly removed from the
field stripped gun parts usually within 4-6 minutes of immersion
with minimal hand labor. Heated ultrasonic cleaning, followed by
rinsing and ultrasonic lubrication with supplied lube pan and
special oil, insures that the parts are moisture free and
protected. After excess lubricant is removed from the parts with
compressed air, they can be lubricated in accordance with
manufacturer's instructions or your S.O.P.
The parts are then restored to factory new level of cleanliness
which could not be achieved by the usual hand cleaning methods. The
process does not affect night sights, rubber grips, and plastic
frames or leave the parts dried out and unprotected.
4.How To Clean Your Gun Parts With Ultrasonic Cleaner.
(1). Field strip the gun
(2.) Swab the bore with a good defouler like Hoppes #9
(3). Insert the stainless steel basket into the ultrasonic cleaning
system
(4.) Insert the polycarbonate tray into the stainless steel basket
Ride The Waves Ultrasonic Gun Cleaning Equipment
(5). Add cleaning solution concentrate Cleaning Solution
(6). Turn heating unit on to 50 degrees C
(7). Insert gun parts into the ultrasonic cleaner
(8). Set the cleaning time for between 5 and 30 minutes, depending
on how dirty the gun is. (Light maintenance on the lower end of the
time scale, heavy cleaning on the higher end of the time scale.)
(9). Turn the ultrasonic cleaner on
(10). Check guns periodically for cleanliness
(11). When clean, turn off heat and the ultrasonic unit
(12). Swab the bore with a good defouler like Hoppes #9
(13). Always lubricate your gun after cleaning
- All stainless steel - ensures many years of trouble free
performance
- The most advanced transducer design in the industry
- Simultaneous technology - provides the highest performance of any
system
- eliminates standing waves and provides a safe cleaning environment
for all gun surfaces
- Best warranty in the industry - you talk directly to our support
staff who designed and built the system
- Two Cleaning Process To Provide Detail care for your gun,including
rough and precision cleaning.
- Degas Function will improve cleaning effect and reduce oxidation on
your gun parts.
Specification
6.Specidication of JTS-1010
| Model | JTS-1010 | Frequency | 40,000Hz |
| Tank capacity | 30L | Timer | 1-99 mins |
| Tank size | 90.8 x 20.5 x 15.9 cm | Unit size | 97.8 x 27.3 x 35.6 cm |
| Box packing | 114.3 x 38.1 x 44.5 cm | Function | Degasing/Draining |
| Ultrasonic power | 600W | Heating power | 500W |
| N.W. | 33kg | G.W. | 35kg |
| POWER SUPPLY | AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz |
7.Detail picture
