Digital Ultrasonic Generator For Ultrasonic Cleaner External Control 600W 28Khz JM-600

Same series Generator with different power:

Function and button instruction

Power switch: cut in or cut off input power; When switch stay at “ON” and the light of switch is on, then the input power is normal.
Display and button: showing working condition and set timer for generator
Power adjust knob:turning left is for weaker power,turning right is for stronger power. Power can be adjusted through power adjust knob.
High frequency output terminal:left side is positive,right side is negative, wrong position is not acceptable.It will have possibility for electric leakage or no output power if you connect the wrong side.
PLC remote terminal:This terminal is optional and has two output cable. You will only get output when the terminal is short circuit.
Power plug and power cord:connecting power through plug.Power will be supplied to generator.
Fan:Cooling system for internal part of generator. It can ensure the reliability of parts
Nameplate:showing main electrical parameter like frequency,power, input voltage.
Please operate generator under these condition or it will damage the generator.

Instruction of other function on generator
Frequency tracking:If the difference of Transducer frequency stay at the range of +-1.5KHZ,generator can match the difference automatically without adjusting frequency.
Current stable ring:The generator has stabilizing circuit loop so Current will be stabilized at the named parameter (+-0.1A), no matter at the condition of overload or the change of water temperature and power supply. It is a key for stable cleaning.
There is EMI circuit in the generator and Power is adjusted by phase-shifted fullbridge technology. So it can make the influence from outside at lowest level. Comparing to traditional Thyristor tuned circuit, it can totally solve the problem of serious surge current and serious conduction disturbance and radiation disturbance caused by surge current under 90 and 270 degree phase position.

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center